Libreelec version 20220824. fixed installation on eMMC for rk356x models. Important. the order of installation on eMMC for rk356x. Before installing LE, you must install ArmbianTV, this is necessary to update u-boot in eMMC (without updating u-boot, there are no guarantees that the system will start from eMMC). After installing Armbian, we run and install LE. To install LE, open the LE settings -> eMMC menu and select the eMMC installation mode in it. The automatic procedure for installing LE on eMMC will be started, after the installation is completed, the system automatically shuts down, disconnect the media and start the system. Please note, after updating u-boot in eMMC, you can run any Armbian\LE\AltLinux system from any media (SD card or USB media).
important, now u-boot supports EFI\Grub startup mode in all images. i.e. if you install any image on eMMC\NVMe. new u-boot with EFI\Grub support will be installed automatically and it will be easy to run any "old" or "new" system that uses the startup mode with extlinux.conf or with EFI.
Libreelec 20220426 kernel 5.18-rc4
ArmbianTV ver 20220512 kernel 5.17.6 (current) and 5.18-rc6 (edge)
Libreelec ver kernel 5.18.0
Libreelec ver kernel 5.18.6
Libreelec ver kernel 5.18.12
Armbian kernel 5.18.19 and 5.19.3
Altlinux kernel 5.18.19
Libreelec version 20220824. fixed installation on eMMC for rk356x models. Important. the order of installation on eMMC for rk356x. Before installing LE, you must install ArmbianTV, this is necessary to update u-boot in eMMC (without updating u-boot, there are no guarantees that the system will start from eMMC). After installing Armbian, we run and install LE. To install LE, open the LE settings -> eMMC menu and select the eMMC installation mode in it. The automatic procedure for installing LE on eMMC will be started, after the installation is completed, the system automatically shuts down, disconnect the media and start the system. Please note, after updating u-boot in eMMC, you can run any Armbian\LE\AltLinux system from any media (SD card or USB media).
Armbian kernel 6.0-rc3
Altlinux kernel 5.19.5
Armbian kernel 6.0-rc4 (edge) and 5.19.7 (current)
Armbian kernel edge 6.0-rc6 , current 5.19.10 , legacy 4.19.232
Altlinux kernel 5.19.10
important, now u-boot supports EFI\Grub startup mode in all images. i.e. if you install any image on eMMC\NVMe. new u-boot with EFI\Grub support will be installed automatically and it will be easy to run any "old" or "new" system that uses the startup mode with extlinux.conf or with EFI.