Station M2 - AndroidTV 11 Custom Firmware
|
Original topic Author:lonewolf31,If you repost, please indicate the source:《 Station M2 - AndroidTV 11 Custom Firmware 》
|
Original topic Author:lonewolf31,If you repost, please indicate the source:《 Station M2 - AndroidTV 11 Custom Firmware 》
I have a few questions ...
where are all the changes done documented ? Source?
this rom was built for station m2 , using firefly-roc-pc dts/dtb file
is it possible , maybe , to share all the changes , sources , or maybe build roms for each rk3566 android box device using the dtb sources inside of each device firmware files?
this rom will work ONLY on m2 , don’t try to load it on your android box
if I upload my device dts ‘ or dtb , can you recompile your source , with my dts?
I tried sddiktool , and created the sd memory having sd boot checked ... with a firmware image of my device ( which is installed already so I know it works ) to be sure it loads
and it didn’t load ... get the android icon with “ no command “ message , instead of android starting
https://www.dropbox.com/s/747400zmni...31D6.jpeg?dl=0
not sure this tool makes a working bootable android on SD , it looks like it just builds an upgrade/restore tool on sd , not a system load
so back to my question .. is it possible to recompile if I provide my dts file[img][/img]
If just connected with USB to a PC, it will be an MTP device and not be able to flash firmware.
Do this to set the device in Loader mode to flash firmware:
Make sure you are using AndroidTool v2.84(link in opening post) or 2.81 on the wiki page.
Install DriverAssistent 5.1.1
Hold a paperclip, toothpick or Allen wrench in the round Line out(audio) connector.
You should feel it presses against a button(the recovery button).
Hold it while you connect a USB-C cable to the OTG port on the device and plug the USB-A side into a back USB port on your PC.
Don't connect the power adaptor, the USB cable connected to your PC will provide enough power to flash firmware.
AndroidTool will say 'Loader mode found'.
Now you can load the firmware file on the second tab of AndroidTool and click 'Upgrade'.
If you accidentally flashed to the SPINOR storage and not emmc(it failed at 3%), you can flash the miniloader to the device and erase the emmc and SPINOR again.
Here are instructions and a wiki page to help:
https://wiki.t-firefly.com/en/RO ... h.html#maskrom-mode
http://en.t-firefly.com/doc/download/93.html
Reviews
Fix 10-bit H264 playback
Improve H265 playback
Fix HDR10+ playback VP9 L2
Better HDR playback in Kodi
Add frame rate switching for Just Video Player and SmartTubeNext
Add top row shortcut
Remove debug menu from settings
Disable Google Play protection
Storage permissions for default applications
Updated apps
Add HDMI support for recovery
Delete ro.kernel.android.checkjni
Repair: BitStream: If you change the sound output device, the Chinese display error
Increase the default maximum password length to 64
Add graphics_allocator permission
Allow proc bluetooth
Fix double ripple in Wifi selection
Don't request rendering in GLSurfaceView.GLThread ctr
For automatic frame rate switching-
Remember to press and hold the power button on the remote control or settings-device-restart, restart the device after power on to take effect.
Add recent application menu
(double-click the home button to open)
Add Exfat file system support
Add mouse browsing support
(Use an air mouse and hold down the OK/DPAD_CENTER button and move up/down to browse Chrome, Websites in Firefox and other browsers)
Download Link: Here
Fix Bluetooth couldn't connect
Fix audio playing over bluetooth and speakers simultaneously
Allow internal volume change
Changed volume steps to 20 instead of 15 for more accurate bluetooth headphone sound changing
Based on newest Android code
Kodi - Improved True-HD playback, no micro-stutters anymore, faster speed
Updated apps
Changed default screensaver(Shows wallpaper without an internet connection)
Support for Firefly remote, apps
Download Link: Here
To flash to micro-sd, SSD or USB 3 Storage(not emmc)
Make sure StationPC OS v1.0.6 is installed and with System Assistant App, write bootloader was done.
Flash StationPC OS v1.0.6 if not installed on emmc.
In AndroidTool, second tab, Upgrade firmware(Don't do EraseFlash)
https://www.stationpc.com/download
Download Link:
https://mega.nz/file/wjhUSZiQ#_6rrIQss8m1SZ85jWqBKLMiqK817pBMBXsKCJEyDD3g
Add Exfat, EXT4 FS Support
Add Ethernet spoof as wifi connection to fix some games like Asphalt if played over ethernet
Add support for Virtual Mouse Toggle - Install this app - https://github.com/virresh/matvt/releases
Improve apps' performance
Add Shell command prompts in TvSettings
Remove SDCard notifications
Download Link:
https://mega.nz/file/p7hzSJyS#d6YEXro7ykVGEFVBRGMwsU4f957k-Sjt84QxGfiX-TQ