Station M1 RK3328 Slarm64 (aarch64)

mara Senior member Station M1 2021-11-21 03:38 3948 35 0

Original topic Author：mara，If you repost, please indicate the source：《 Station M1 RK3328 Slarm64 (aarch64) 》

Like (0)

Reply Report

All comments：35Replies

nag Newbie 2021-12-1 11:45:34

沙发

Thanks!

Report Reply
Chris4arm Member 2022-2-21 03:12:04

板凳

Hi,
I copied slarm64-current-aarch64-server-station_m1-5.16.9-build-20220220.img.zst on a SD card and put it in the M1 but it booted on Station OS instead of slarm64
What I have missed ?

Report Reply
mara Senior member 2022-2-21 05:41:30

地板

Hi,
try the method with the primary unpacking of the zst archive and recording via dd (as described in paragraph 1), if everything also starts Station OS, look at the multi boot description.

Report Reply
Station Helper Official 2022-2-21 16:27:14

5^#

Chris4arm Posted at 2022-2-21 03:12
Hi,
I copied slarm64-current-aarch64-server-station_m1-5.16.9-build-20220220.img.zst on a SD card an ...

Hi, mara answered your question in this topic. Thanks.

Report Reply

Chris4arm Member 2022-2-21 18:05:34

6^#

Last edited by Chris4arm on 2022-2-22 16:29 Editor

mara Posted at 2022-2-21 05:41
Hi,
try the method with the primary unpacking of the zst archive and recording via dd (as described ...

Hi mara,

to expand the file the "--no-sparse" argument seems necessary. Unfortunately this method doesn't work either : the M1 boots on Station OS

For the multiboot option : I have very few applications in "All Apps" and not OS Assistant !

Note : I have no problem to boot (several images of) Armbian with this same SD card.

Report Reply

mara Senior member 2022-2-21 18:22:45

7^#

Chris4arm Posted at 2022-2-21 12:05
Hi mara,

to expand the file the "--no-sparse" argument seems necessary. Unfortunately this method ...

Hi Chris4arm,

1.

zstd -d slarm64-current-aarch64-server-station_m1-5.16.9-build-20220220.img.zst

Copy the code

dd if=slarm64-current-aarch64-server-station_m1-5.16.9-build-20220220.img of=/dev/mmcblk0 bs=1M

Copy the code

Report Reply

Chris4arm Member 2022-2-21 18:34:34

8^#

mara Posted at 2022-2-21 18:22
Hi Chris4arm,

1.

The first command failed with this message :
3673 MB... zstd: error 92 : Sparse skip error ; try --no-sparse
so I do
zstd --no-sparse -d slarm64-current-aarch64-server-station_m1-5.16.9-build-20220220.img.zst
then
dd if=slarm64-current-aarch64-server-station_m1-5.16.9-build-20220220.img of=/dev/mmcblk0 bs=1
then put the card in the M1, power on and boot... on Station OS !

I repeat : when I copy Armbian images on this card, they boot directly...

What's wrong ?

Report Reply

mara Senior member 2022-2-21 19:02:34

9^#

Last edited by mara on 2022-2-21 13:06 Editor

Chris4arm Posted at 2022-2-21 12:34
The first command failed with this message :
3673 MB... zstd: error 92 : Sparse skip error ; t ...

it shouldn't be so check the image

sha256sum -c slarm64-current-aarch64-server-station_m1-5.16.9-build-20220220.img.zst.sha256

Copy the code

zstd -t slarm64-current-aarch64-server-station_m1-5.16.9-build-20220220.img.zst

Copy the code

Report Reply

Chris4arm Member 2022-2-21 21:22:20

10^#

mara Posted at 2022-2-21 19:02
it shouldn't be so check the image

or

$ zstd -t slarm64-current-aarch64-server-station_m1-5.16.9-build-20220220.img.zst
slarm64-current-aarch64-server-station_m1-5.16.9-build-20220220.img.zst: 6596591616 bytes

Copy the code

I can mount the SD card with this image on my PC but it doesn't boot in my M1.

fdisk -l slarm64-current-aarch64-server-station_m1-5.16.9-build-20220220.img
Disk slarm64-current-aarch64-server-station_m1-5.16.9-build-20220220.img: 6.15 GiB, 6596591616 bytes, 12883968 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xd1c2a448
Device Boot Start End Sectors Size Id Type
slarm64-current-aarch64-server-station_m1-5.16.9-build-20220220.img1 32768 12883967 12851200 6.1G 83 Linux