Ver
20220211-edge kernel 5.17-rc3
20220210-edge kernel 5.16.8
20220209-legacy kernel 4.19.219
The good news is that Station M2 P2 is now included on the download page and after the official release, links to download the official versions will be available.
The new version is 20220317. An important change. Added support for starting the system from USB media. So far, only USB 2.0 is supported, for P2 - the lower USB 2.0 port.
Good news. :)
The first alpha version of the LibreELEC image for P2\M2 (rk356x) is available.
I pay attention. To start, you need to use a USB media with LE and a USB-enabled bootloader (for example, an SD card with an Armbian version or an Armbian version installed in eMMC).
New versions of LE 20220415-rk356x.
Now the image has a working u-boot and you can start the system without using additional media with Armbian.
Ie, you can write the LE image to an SD card and the system starts automatically. The USB startup option also works.
Important. The u-boot used in LE is fully compatible with running any systems from SD and USB media. You can have the LE version on SD\eMMC and run new versions of LE\Armbian\Altlinux from USB.
20220211-edge kernel 5.17-rc3
20220210-edge kernel 5.16.8
20220209-legacy kernel 4.19.219
The good news is that Station M2 P2 is now included on the download page and after the official release, links to download the official versions will be available.
New version 20220214 of images with 5.16 and 5.17 kernel.
All ports USB2\3, SATA, LED work, SD and eMMC operation speed is improved
Not sure where I go from here. I have the bare RK3566 board.
1. This is a topic about P2 rk3568 (not M2).
2. What exactly is your device model? Can you show a photo or a link to your device model ?
The first alpha version of the LibreELEC image for P2\M2 (rk356x) is available.
I pay attention. To start, you need to use a USB media with LE and a USB-enabled bootloader (for example, an SD card with an Armbian version or an Armbian version installed in eMMC).
https://disk.yandex.ru/d/nLZ6UCxUpWMMUQ
Now the image has a working u-boot and you can start the system without using additional media with Armbian.
Ie, you can write the LE image to an SD card and the system starts automatically. The USB startup option also works.
Important. The u-boot used in LE is fully compatible with running any systems from SD and USB media. You can have the LE version on SD\eMMC and run new versions of LE\Armbian\Altlinux from USB.